Home

Climate change is impacting households all over America, and the upcoming El Nino effect will likely cause skyrocketing temperatures and an increased amount of extreme weather events over the next few months.

This means that homeowners need to be prepared for inevitable outages, and being on the hunt for generators for sale is a good start in terms of protecting your residential property in case a prolonged power outage occurs in your area. Standby generators are absolutely critical for a home’s safety, because they’ll automatically turn on when your municipal power supply shuts down.

So it’s understandable if you’re a little bit cautious about which generators are best for your unique needs, and the truth is that there are several generator options that you’ll have to choose between. Below are some tips to keep in mind while you’re thinking about purchasing a generator for sale!

Which Generator Fuel Type Do You Want? 

The first differentiation you should consider when shopping for standby generators is how you plan on fueling your home’s generator. Your two main fuel options will be liquid propane and natural gas, and here’s a quick breakdown of both options:

Liquid Propane Generators 

The important thing to keep in mind about liquid propane generators is that you’ll also need to invest in a propane tank to ensure a proper hook up for your generator. Propane is typically a good fuel option for households located in remote areas, or anywhere that doesn’t have easy access to municipal gas lines.

Liquid propane is also a much cleaner fuel as compared to natural gas, and your generator will always keep running as long as you have enough fuel on hand. Of course, it’s important to remember that you’ll need to refuel your liquid propane tank on an occasional basis to make sure your generator is ready for the next outage that may occur.

Natural Gas Generators 

Generators powered by natural gas will subsequently be hooked up to your property’s existing gas line, or a new gas line will need to be installed. This is often considered to be a convenient option for homeowners, because you won’t have to worry about maintaining your generator’s fuel supply.

Natural gas is also more affordable as compared to liquid propane, but one significant drawback is that these generators are impacted when municipal gas lines are also impacted. You may also need to acquire permits to obtain a natural gas generator at your home, but this should be something that your electrical team supports you with.

Understanding Your Home’s Wattage Needs 

After you’ve determined the right fuel source for your next generator, you’ll also need to figure out the amount of watts your generator needs to be able to fully support your home. There are plenty of generator sizing tools and digital calculators to help you figure out which size will be right for your property.

One consideration to keep in mind is that your generator should be capable of providing about 20% more voltage than your home’s appliances require. This is because your generator will be needed during outages and other emergency situations, so the load management of your unit is crucial in terms of ensuring its viability and long-term durability.

Understanding Transfer Switch Needs 

Once you’ve shopped for generators and have found a unit that seems right, you’ll need to figure out where your transfer switch will be located. Your generator’s transfer switch is important, because it’ll be what connects your unit to its control panel.

This switch will essentially be what lets your generator know it’s time to turn on and shut off, which is dependent upon your municipal power supply. You may need a sub-panel that only serves to support your generator, so this is an important question to ask your electrical specialists prior to your installation.

Generator Installation Factors To Keep in Mind 

It’s important to remember that generators can only be placed in certain locations throughout your property. The generator will need to be installed at least five feet away from any openings or doors, and the exhaust needs to be pointed away from doors and windows.

Generator installations also typically require legal permits, as well as many other material requirements. This is why it’s absolutely necessary to work with reputable electrical companies when you need a generator installation at your home!

Contact The Yoder Electric Team When You’re Looking at Generators For Sale! 

The above factors are a great starting point to help you narrow down your options while you’re browsing through generators for sale in your area, and the best thing you can do is speak directly with industry specialists while making these all-important home investments.

You can learn more about generators by going through the link at the top of this page and speaking directly with the whole-house generator specialists at Yoder Electric!

Trees are an essential component of the ecosystem, providing much-needed oxygen, shade, and beauty. While they offer numerous benefits, caring for them can be a daunting task. Proper tree care requires knowledge, skill, and experience, which is why hiring a certified arborist is crucial.

Certified arborist are professionals who have undergone rigorous training and certification processes to become experts in the care and management of trees. They possess a wealth of knowledge on tree biology, chemistry, and physiology, enabling them to make informed decisions when it comes to tree care. They also have the necessary tools, equipment, and experience to carry out various tree care services, including pruning, fertilizing, and plant health care.

Expert tree care from a certified professional

Looking for expert tree care? Look no further than a certified arborist, your trees will be in good hands! A certified arborist is a professional who has achieved a high level of training and knowledge about trees and their care. They are skilled in diagnosing tree problems, identifying tree species, and maintaining the health of trees. Certified arborists have the tools, expertise and experience needed to keep your trees healthy and thriving. By utilizing industry best practices, your trees will be well taken care of, from pruning and trimming to disease and pest control.

Get peace of mind knowing your trees are in skilled hands

Look up at the towering trees in your yard and imagine their strong limbs swaying in the gentle breeze. Your trees are one of the most valuable aspects of your landscape and they deserve to be taken care of by someone who knows what they’re doing. Enter the certified arborist – the skilled professional who has dedicated their life to understanding the art and science of tree care. With a certified arborist by your side, you can breathe a sigh of relief knowing that your trees are in good hands. These trained professionals are equipped with the knowledge and tools necessary to perform pruning, fertilizing, and other tree care services that keep your trees healthy and strong. So go ahead, sip your morning coffee on the patio while admiring the beauty of your beloved trees. Your certified arborist has got it all under control.

Enjoy the beauty of your trees with the help of an arborist

Are you tired of staring at your boring backyard, wishing you could add a touch of nature’s beauty to it? Look no further than a certified arborist! Not only can these tree whisperers help you plant new trees and select the perfect species to complement your yard’s existing flora, but they can also ensure that your beautiful trees continue to thrive year after year.

Accessory dwelling units (ADUs) have become wildly popular throughout the United States in recent years, and these types of units have become a part of countless properties throughout several decades.

We all know how inflation and other economic factors have made home improvement investments less feasible for a lot of families, so sometimes it’s difficult to answer the hard question: Is an ADU a good investment?

We’ve partnered up with Casita Floor Plans by The Dryve Design Group to develop this article oriented around answering this fundamental question. So if you’re thinking about investing in an ADU on your residential property, keep the below sections in mind to better understand how this type of home improvement opportunity can truly benefit your livelihood!

First You Need To Know About The Different Types of ADUs

ADUs are always 100% unique, because every property has a unique lot layout and dimensional needs. The good news is that you can invest in an ADU that’s specifically tailored to you, and the following are a few examples of the common types of ADUs:

• A converted basement
• Converted garage
• Adding space to your primary residence
• Building a new structure (which is often prefabricated)

So How Exactly Is An ADU A Good Home Improvement Investment?

Each type of ADU provides unique benefits and overall investment potential, but every ADU does the same thing by adding to property values and providing additional dwelling spaces. ADUs are also great for tax purposes, particularly when you decide to sell your home.

But it has been proven that ADUS significantly add to property values, and this is partly because they make a home much more desirable for potential buyers. A lot of people these days also utilize their ADUs as an income-producing unit, which typically means renting short or long-term to tenants.

So it’s always a win-win situation when you invest in an ADU at your property!

Important ADU Investment Factors To Keep In Mind

There are always many different factors that ADU investors need to keep in mind, including the following:

• Local zoning laws and regulations
• Construction costs
• Potential financing options
• Potential rental income
• Overall quality of ADU construction
• Repair and maintenance costs
• Insurance coverage
• The ADU’s long-term value and ROI

Each of these investment factors need to be carefully analyzed by homeowners, and the good news is that ADU construction companies typically help you with this type of data and preparation work so you don’t need to worry so much about these finer details!

Common Benefits Of Investing In An ADU

As is easy to imagine, there are plenty of awesome benefits associated with ADU investments. One of the main reasons why ADUs are becoming so popular in recent years is because more people are becoming aware of the many benefits they provide.

Here are some of the common ADU investment benefits you should know about:

• Additional source of income
• Flexible living options for guests, aging parents and adult children
• Increasing your property value
• Improving your household’s quality of life
• Creating a cutting-edge home office
• Eco-friendly construction processes
• And A LOT more!

Reach Out To The ADU Design Experts At The Dryve Design Group To Learn More About Investing In ADUs at Your Property!

There are many reasons why you may be considering home improvement investments like an ADU at your home, and it’s absolutely true that these investments can greatly benefit you and your entire livelihood.

The best thing you can do to capitalize on these investments is to partner up with a reputable ADU construction business, because industry experts can let you know how to cut costs and create a custom ADU that’ll work to meet your unique needs.

You can learn more ADU investment tips by going through the link at the top of this page to the Dryve Design Group’s website!

Saltwater fibreglass pool is a popular choice today for homeowners. After all, investing in a swimming pool is a major decision and everyone wants the best experience to come out of it. However, with saltwater pools, there are a lot of questions. In this article, we will try to answer some of them.

Does it taste salty?

Yes, but don’t be put off by this. The taste is not unpleasant. In fact, it’s not salty enough to be unpleasant. It’s the same as a normal pool. If you’ve ever swum in one, then you’ll know what we mean here by saying that it “tastes like” the ocean or sea.

Saltwater pools do have a saltier taste than non-salt water pools, and they can also have more chlorine smell added to them. Because of this, they don’t smell bad when people swim in them.

How does a saltwater pool work?

You might wonder how it is possible to have a brisbane saltwater pool. Won’t the pool turn into a cesspool without chlorine? The answer is no. Even though a saltwater pool doesn’t actually have ocean water, it is still capable of converting salt to chlorine. For this, you will need a salt chlorine generator, which uses a process known as electrolysis to do the same.

So, even with a saltwater pool, you will have enough chlorine. The only difference is that instead of using a large amount of chlorine, you will only be using salt. Once you have added the salt to the water, the generator will do all the work. In one week, you will be able to save a tablet or two of chlorine.

How salty is a saltwater pool?

As you may have guessed, saltwater pools are not as salty as the ocean. Some people say that they’re slightly more salty than freshwater pools, but this isn’t always true. In fact, it’s actually pretty hard to tell how much salt is in any given pool unless you use laboratory equipment or test samples of water yourself.

Percentage of salt in a saltwater pool

The percentage of salt in a saltwater pool depends on the amount of water it contains. A typical pool will have around 1% salt, with some models having up to 3%. This is low compared to other chemicals used in swimming pools and does not present any health concerns for swimmers.

Does saltwater pool water have a smell?

The water in the saltwater pool has a slight smell that is not unpleasant, but it’s not like the ocean or sea either. The smell is similar to chlorine and ammonia but less intense than both of those elements combined.

The smell will vary depending on the amount of salt and other minerals in the water. The more minerals it has, the stronger the smell will be.

The taste of the water isn’t strong and doesn’t linger for long

In a saltwater pool, the taste of the water is not strong and doesn’t linger for long. A lot of people compare it to the ocean or seawater, but it’s not unpleasant at all.

The water is safe for swimming, but it might not be ideal for drinking. It’s best to use a chlorine or saltwater pool filter to remove any contaminants before you drink it.

Experiment with different types of salts

You can experiment with different types of salts to see which works best for you. Different salts have different levels of saltiness, so it’s worth experimenting with them all and seeing which one you prefer for your pool. Some are more expensive than others (and these tend to be the ones that are less salty). But if a cheaper option doesn’t work as well as an expensive one, then it might not be worth trying out at all!

Do you like the taste of salty water?

If you like the taste of salty water, then you’re likely to enjoy a good quality saltwater fibreglass pool. This can be an excellent choice for people who want to enjoy their own private spa experience in their own backyard.

Saltwater pools are not like the ocean or sea. They are more like a natural spa with soft water that is clean and healthy for skin contact. The taste will vary from person to person depending on what foods they’ve eaten or drank recently. But it should not be too salty for most people who do not have sensitive palate buds (as long as there is no added salt).

Saltwater fibreglass pools are not like the ocean or sea

In a nutshell, saltwater fibreglass pools are not like the ocean or sea. They are filtered, heated and treated with chemicals in order to ensure that they don’t have a salty taste.

Saltwater pools are made from materials that aren’t as porous as traditional concrete or vinyl liner pools. The water flows through these materials just fine. It doesn’t irritate your skin because you can touch the walls of your pool without worrying!

In fact, for this reason, many people prefer saltwater for their fibreglass pools. This allows them to feel cleaner and leave the pool without having the chlorine taste that other types of pools offer. Also, they won’t have to deal with the chlorine smell or the eye burning. Both these issues are quite common in chlorine pools.

Saltwater will also keep your pool a lot cleaner. When you are in the pool, you might even experience a silky feel. This is why more and more people today are opting for the saltwater system for their fibreglass pool.

Conclusion

Saltwater pools are great for people who want bigger and better water features. The best part about them is that they don’t require any extra maintenance, so you can focus on other things in life. If you have been looking into a saltwater pool but were worried about how it would taste, then don’t worry! Saltwater is actually very easy to clean and maintain compared to traditional chlorine pools. With all of these benefits at hand, it’s no wonder why more people are choosing saltwater over traditional chlorine pools today!

If you’re looking for a way to make your pool opening special, there are many ways that you can do it. You can choose a theme, set up an ice cream bar and punch, have proper decorations and even have the guests wear their swimsuits. Read on to get more ideas on how you can do that.

Choose a theme

A theme is a great way to set the tone for your pool party. It can be as simple as getting together with friends and family, or it can be more complex and ambitious, such as hosting an outdoor fashion show. The best themes will be easy for you to execute at home, in line with your budget, and in keeping with the season.

Set up an ice cream bar

When you’re throwing a grand party, it’s important to make sure that your guests have plenty of options for eating and socializing. To set up an ice cream bar, start by gathering all of the ingredients you’ll need.

• The first thing you need is an assortment of different flavours. Vanilla, chocolate and strawberry are good choices. If there are any kids in attendance at your opening night celebration, try making some kid-friendly flavours too like peanut butter or yogurt!
• Next up comes toppings. Try sprinkling them over each cone before adding in any ice cream itself.

Put out some punch

Choose a fun colour. Add fruit and ice cubes. You can get creative with this one, but be sure that you have plenty of ice since the punch will dilute over time. You’ll want it to stay cold for as long as possible! If you don’t have time or access to fresh fruit, try using frozen berries instead. They’ll still taste good!

Have proper decorations

Decorations can be as simple as balloons and streamers, or you can use them to enhance your theme. You could also have tablecloths that match the colour scheme of your party.

Color-coordinate your balloons with the colour scheme of your fibreglass pool perth. Get a helium tank that is large enough to fill all the balloons, but small enough to fit in your car.

Get your pets involved

If you have pets, it’s important to include them in the party. You can have a pet costume contest or even an animal parade with your guests. You can also offer prizes for the best costume and even have an animal talent show!

Lay out some games

Have a pool tournament. This can be a fun way to get your guests involved and help you learn if they like playing the games. If you want to make it more interactive, have them vote on which game they want to play next. You can even score points for each round of that game by hitting certain targets.

Add a sunscreen station

You should definitely have a sunscreen station. Make sure you have enough sunscreen for everyone, and each member of your family has their own container of sunscreen (one bottle per person).

You can also add other things like a towel station or goggles/sunglasses stand. This way, people can grab what they need without getting all over everything else in the fibreglass pool area!

Buy cute floats

When you’re selecting floats, it’s important to choose the right ones. Here are some things to keep in mind:

• They should be comfortable. If the float is too hard or uncomfortable, your guests will avoid using it and get bored quickly.
• Don’t choose anything that’s difficult for anyone in your party to swim with—especially if there are children involved!
• Your choice of floats should also be easy to store away after use. This way, no one has to worry about losing them or breaking them before their first use (which could happen).

Fire up the grill

Get a gas or charcoal grill. If you’re going to be grilling, make sure you have enough propane or charcoal to meet your needs. Clean the grill before using it—and don’t forget to put on the lid! Don’t forget about cleaning after use!

Plan ahead to avoid messes

To avoid any headaches, it’s important to plan ahead and prepare. Make a list of everything you need to do: game night, food and drink, decorations and other fun stuff like that.

Next, make a list of things to buy: pool toys (if there are kids at your party), swimsuits/swim caps/swim towels etcetera. Then consider renting some floats or tables if they’re not included in the rental package. Lastly, find out if there are any other vendors who might be able to offer additional services such as concessions or photo booths. Once this is done feel free to begin planning how much time each person will contribute towards making sure everything runs smoothly throughout the day.

Determine the budget

Before you start planning your pool party, it’s important to determine the budget. This will help you determine how much money you’re willing to spend on food and decorations.

The first thing to consider is: how much money do I have? If there are any upcoming expenses that might cut into my budget, then it’s best if those things are taken care of before the party begins. This way, they won’t impact your celebration plans. Also, think about what kind of entertainment would be the most fun for everyone involved. Do we want live music, or do we want to go with something more low-key, like a DJ?

Once these questions have been answered, create a list showing exactly where each dollar goes within the overall budget. Then look at each item on this list and ask yourself whether or not it falls into one category (food/decor) as opposed to another category (entertainment).

Hire a caterer

Hiring a caterer can be one of the best things you do for your pool opening. The caterers will help you with all aspects of the party, from food and drink to entertainment and venue. Caterers are experts in their field, so they know exactly what types of foods your guests will enjoy and make sure that everything is served hot on time. They also have high-quality equipment at their disposal (such as ice cream makers or bakery ovens), which means less work for you!

You should consider hiring a caterer if:

• You don’t have time to do it yourself—but don’t want to go overboard either,
• You want something special but aren’t sure where to start,
• Your budget doesn’t allow for anything extravagant, yet.

Conclusion

If you have a big fibreglass pool opening and need some creative ideas, we’ve got you covered. We hope the tips above give you the inspiration needed to make your party even more memorable!

Pool plumbing systems are an important part of the overall operation of your pool. They need to be properly installed, maintained and repaired. This article will provide you with a comprehensive guide on swimming pool plumbing so that you can have a better understanding of how they work.

How pool plumbing systems work

The pool plumbing system is a complex network of pipes that carry water from the tank and through each component, from the filter to your spa. The purpose of each component is different and should be considered when choosing a new one for your swimming pool.

The most important thing you need to know about swimming pool plumbing systems is how they work together. The process starts with filling up an empty pool with water so that it can heat up. It ends when all of its minerals settle out in an even distribution (or “settling”). This process can take anywhere from 24 hours to several days, depending on where you live, but there are ways around this issue if necessary.

In order for this process to happen not only efficiently but also safely, many different types of equipment come together within these systems.

Plumbing the main drains

The main drain is a pipe that runs from the pool to the street. It’s usually located at a low point in the pool and should be sized based on your capacity. But it’s also important to make sure that this drain is located at least 1.5m away from any structures or equipment in your yard.

If you’re not sure where this pipe is located on your property, talk to a professional. It may be easier than digging up your lawn.

Plumbing the skimmer

The skimmer is the last thing you want to mess with when it comes to pool plumbing. If your skimmer isn’t working properly, then your pool will not be as clear as it should be. So, how do you know if a skimmer needs fixing? There are two main criteria: location and drain placement. Let’s take a look at each of these points in turn:

Location – The first thing that should always come into consideration is whether or not there are obstacles, such as rocks or other debris, in the way. If so, then try finding somewhere else near where those objects can be removed before moving forward with this step!

Drain Placement – Your second step involves deciding on exactly where each drain line connects back up into itself. This is the point before it enters one of several possible outlets at either end of the said line. You may also choose just one particular outlet since both options work well. However, this will depend on the type of plumbing that has already been installed.

Plumbing the returns

Plumbing the returns is an important step in plumbing your pool. Return pipes are used to distribute water from your pump, skimmer and main drain to the deep end of your swimming pool.

Return pipes are usually located at the deep end of a swimming pool, where they connect directly with drain orifices (also known as weep holes). The length of these return pipes depends on what type of return you have:

• Foam-layed or tile drains have short lengths that run along either side of their openings. These types can be connected directly to existing plumbing systems without requiring any additional piping work.
• PVC pipe installations will require more effort. This is because you or your perth pool installer will need to install new sections of pipe within existing walls before connecting them together again at each endpoint.

Plumbing a pool heater

If you have a pool heater, then the return side of your plumbing will be a little different. We will plumb your return side like this:

• Run the pipe from your filter to where it connects with either your heat pump or regular non-heated water source. This could be an outdoor faucet or swimming pool pump.
• From there, run that same line back down through whatever opening it came out of and then into your port labelled “Return”. This is where it splits off into two separate paths. One goes back into the pool itself, and another path leads over to somewhere else outside if needed.

Plumbing other pool equipment

Swimming pool equipment is another important part of the swimming pool plumbing. Pool filters, cleaners and heaters are some of these other pool equipment.

Pool filters help maintain water quality by removing debris from your pool water. Pool cleaners can be used to clean up debris in your filter or even remove stains that may have been left behind by algae or bacteria growth on its surface. Heaters help keep your water at an ideal temperature so you won’t get any skin irritation from cold or hot weather conditions. It is crucial that you get the plumbing of these types of equipment done right. Otherwise, these types of equipment won’t work and might even harm your fibreglass pool.

Pressure testing your pool plumbing

When you’re looking to pressure test your pool plumbing, there are a few things you should know. First, it’s important to note that there are different types of pumps and filters. Some can be replaced easily, and others may require more work. If the pump is working but has been damaged from corrosion or improper installation, then replacing it will be necessary before moving forward with other testing steps.

Second, keep in mind that proper maintenance is key when it comes time for pressure testing. If there’s not enough water flowing through your system, then this could cause issues with how well everything works together as well.

How deep should pool plumbing pipes be buried?

The depth of the pipe depends on the type of soil. For example, if you have an artificial turf surface, then it is recommended that you bury your pipes at least 1.5 meters below the surface. If you have a concrete pool deck or simply flat ground, then it is best to bury them at least 2 meters below ground level.

Conclusion

We hope this article has been helpful to you in learning more about pool plumbing and all of its components. The important thing is to understand how each part works. This way, when there is an emergency or problem with your pool, you can stay safe and know what needs fixing.

Almost by default, owners, both new and old, tend to get ideas about pool parties the moment the weather allows for them. Additionally, any occasion, whether a birthday or an anniversary, is the perfect excuse for a pool party. Fibreglass pools are the trendiest pools on the market today. If you have a new pool, wouldn’t you like to show it off? What better way to do this than to have a pool party?

Nonetheless, not every pool party has a silver lining, as after it’s over, there is a lot of cleaning up to do. The aftermath of a pool party is no laughing matter, although your party may have been. Parties, inside your home or at the pool, leave a single thing behind. A mess. If you don’t clean up after guests have had a whale of a time, your pool ends up in a state as if a hurricane hit it. In the sections that follow, you will find tips and tricks, from start to finish, to clean up efficiently after a pool party.

1. Consider the pool water

Fibreglass pools look great, but not if they are dirty. After your party is over, the first thing to do on your checklist is to test out the water in the pool. In any pool party, water is affected the most. The pH of the water will let you know whether it is safe to take a swim. In case the balance of the water is inappropriate, you may have to add certain chemicals to balance it. You can purchase a testing kit or have a professional service the newcastle pool after a party. It is a good idea to chlorinate your pool both before and after a party. Give your pool enough time for the chlorine to settle.

2. Work the pool pump

Once your pool party is over, it is worth running your pool pump. This is the next thing to tick off as an activity on your to-do after-party checklist. Running the pump helps to circulate the pool water. What this does is get the debris filtered out of the water. Additionally, the circulation of fresh pool water takes place. While the pumping is on, you can use a net for snagging debris you may see floating about in the water. The pump is an excellent device to get small dirt bits and foliage out.

3. Use a hose

It is a wise decision to install a hose near the pool. This not only aids you in watering plants around the pool but is great to clean the area as well. The guests can use the hose to clean their feet before entering the pool, which can actually save a lot of time and effort in cleaning the water later. Additionally, you may also set up a small feet-washing area for guests before they get into the water.

4. Scrub the swimming pool wall and floor

It’s a party. Food and drinks are bound to end up on the floor and in the swimming pool as well. These are bound to stick to the swimming pool wall, as well as the floor. It is imperative that you scrub them out as soon as possible (after the party, of course). If not, not only will the water become stagnant, there is a high chance of algae starting to grow as well. Then it’ll become really difficult to clean your pool and make it suitable for swimming again.

5. Shock the water

Shocking the pool water can help remove small debris and bits and particles of dirt that the naked eye cannot see. In order to ensure that the pool water is healthy to swim in, it is recommended that you shock the pool water after the party.

6. The pool deck, patio, toys and other items

The best way to ensure that the pool deck is clean is to hose them off. If there is a patio near your pool, be sure to clean the floor with a hose too. Make sure you clean all the pool toys and other pool components to make them ready for the next time you use the pool. Before you use the hose to clean, make sure that you move any furniture and plants out of the way. You can work faster if the area to be cleaned is made clear of obstacles.

7. Ensure the right amount of water

Some things to take care of after you have had a pool party that has gone swimmingly well do not concern cleaning up per se. During a pool party, there is a lot of plunging and jumping into the pool. This results in water loss. You may find that your water in the pool has depleted, and this has to be replenished. The pool water should always be above the level of the skimmer, so you should attend to this.

8. Rearrange the pool area

Before a pool party, you may have cleared the area around your pool to make more free space for guests to move around freely. After your party, you will likely have to move all the furniture, plants, etc. back to where they belong. Besides this, you must check whether your pool equipment is working at its optimum levels. This has to do with everything from wires and connections that may have gotten damaged to broken pool lights (if any).

Conclusion

Pool parties are fun. However, it is very important that you take care of your pool after the party. Your pool and the area around it will get cluttered with party mess. There is also suntan lotion and body oil that can cause unhygienic surroundings after a pool party. To dive into your pool again, you have to do some work around your pool after a party has ended. You can call professional home pool maintenance people to give a thorough cleaning. This way, you can ensure that your pool and its vicinity are dirt-free after a party.

Summer is here, and that means that it’s pool season. If you own a fibreglass pool, then you’re probably ready to use it to cool down, exercise, and spend time with family and friends. One way you can make your time by the pool more fun is with pool floats.

Pool floats are great for kids and the elderly, as it helps them to stay afloat in the water, safely. Pool floats are also versatile, being available in a broad range of colours, sizes, and styles. But why get a normal pool float when you can opt for something far more hilarious? Bring a smile on the faces of your family and friends by adding these hilarious pool floats to your fibreglass pool.

Pizza pool float

Do you love pizza? A giant pizza pool float can hold more than one person and look great while floating on the pool. You can also get individual pizza slice pool floats as well. Get a few individual pizza slice pool floats, and bring them together in your pool to make a giant floating pizza. Pizza pool floats use vibrant colours, making them really stand out and look appealing.

Unicorn pool float

A lot of people love unicorns, which makes unicorn-shaped pool floats so popular. You can find unicorn pool floats in various shapes, as well as sizes. Get an inflatable pool float for kids, shaped like a unicorn. These pool floats can inspire children to spend more time in the pool.

Broccoli pool float

Kids, in particular, tend to not be fond of broccoli. One way to get them to spend more time with broccoli is by getting them to use a broccoli-shaped pool float. The broccoli pool float will keep your kids safe while they swim around in the melbourne pool. It might also inspire them to want to start eating broccoli.

Smiley pool float

Smiley pool floats can be found in a wide range of styles. You can go for the traditional smiley face, a frowny face, a winking smiley face, and much more. These pool floats are typically good for one person per float. They can also be purchased in small as well as large sizes. So, both children, as well as adults, should be able to use these pool floats.

Dinosaur pool float

One kind of pool float that can instantly bring a smile to the faces of most people is the dinosaur-shaped pool float. You can find pool floats in the shapes of the most popular kinds of dinosaurs. With dinosaur pool floats in your fibreglass pool, you give people the opportunity to pretend that they’re riding dinosaurs.

Dinosaur pool floats can also be found in a large number of sizes, and you can also find family-sized pool floats, that can be used by large numbers of people at once.

Car pool float

One of the more hilarious pool floats designs that you’re likely to come across, is car-shaped pool floats. While you can find inflatable pool floats shaped like cars, the kind of designs available to you are much more creative. There are pool floats that expand to become floating cars.

You can choose between a large number of colours, shapes and styles. Get pool floats that look like animated versions of cars. Or you could also opt for the pool floats that are shaped like army vehicles, like tanks.

Cat shaped pool float

Most people find cats adorable, which is what makes cat-shaped pool floats so popular. You can find pool floats in the shape of a cat’s head, or larger pool floats that look like a group of cats together. These pool floats are available in a broad range of styles and colour options. You aren’t restricted to just realistic cats either. Cat-shaped pool floats can also be found in unusual colours, like purple and green.

Flamingo pool float

Flamingos are fun, vibrant, and eye-catching. Pool floats that look like you’re riding on the back of a flamingo, are becoming more and more popular. You can also find pool floats in other styles, that incorporate the flamingo into the pool float design. It’s more common to find flamingo-shaped pool floats that look like a pink tyre, with the head of a flamingo sticking out from one end.

Some of these floats also incorporate the hands and legs of the flamingo, which makes them look even funnier.

Shark pool float

Have you ever wondered what it would be like to ride on the back of a shark? While this might be near impossible to emulate in real life, you can still try out the experience by using a shark-shaped pool float in your fibreglass pool.

Kids and adults alike will enjoy the feeling of floating on the pool, on top of a pool float shaped like a shark. Get these pool floats in grey, white, and blue, as well as many other colours.

Banana pool float

Banana-shaped pool floats aren’t just fun to look at, but they tend to be very useful as well. Often, the length of these pool floats allows people to lie down on top of the float, and relax in the pool. The bright yellow colour of these pool floats also contrasts well against the calm blue of most fibreglass pools. Get banana pool floats with smiley faces on them to bring a smile to the faces of your friends and family.

Doughnut pool float

Most people love eating doughnuts. Doughnut-shaped pool floats come in a wide variety of styles. Get a doughnut-shaped pool float that looks like it’s dipped in chocolate, or get one that looks like it has sprinkles on top. Add various designs to your pool and all your guests will have unique doughnut-shaped pool floats to use in your pool.

Conclusion

Pool floats don’t just look fun, but they make using your pool safer for people who might not be strong swimmers. Hilarious pool floats help you to add more personality to your pool design as well. Add the pool floats mentioned in this guide to your pool, and enjoy cracking a smile each time you see these pool floats floating around in your pool.

When you choose to get a fibreglass pool installed in your home, you will get the option to choose what kind of water you want in your pool. Chlorinated pools are the most common, and they are easy to maintain as well. Another less common option you could consider is a mineral water pool. The third option, and one that’s becoming more and more popular, is a saltwater pool.

Should you choose to get a saltwater pool, then it will come with a salt chlorinator. But can you get a salt chlorinator when you have a fibreglass pool?

What exactly is a salt chlorinator?

A salt chlorinator makes use of salt, in order to create chlorine, which is then used to sanitize the pool. Salt chlorinators go perfectly with fibreglass pools, leading to the pair often being considered best friends. In a salt chlorinator, electrolysis is used to create a form of chlorine that is pure. Only a tiny amount of salt is needed to create this pure chlorine. The same amount of salt can also be reused, to produce chlorine. This drastically cuts down on your expenses, when it comes to pool water maintenance.

Note that it isn’t the salt itself that’s sanitizing your pool, but rather chlorine. When you add salt to the pool water, it gets dissolved. The salt chlorinator then turns the dissolved salt into chlorine, which then sanitizes the pool.

How does a salt chlorinator work?

The amount of salt being added to your gold coast fibreglass pool should form the same kind of salinity that you would see in a teardrop. These salts, upon being added to the pool water, will pass through electrolytic plates. These plates are present within the chlorinator cell.

When the salt passes through this chlorinator cell, chlorine is formed. This chlorine can then kill any contaminants that are present in the pool. It can also help in the prevention of the formation of bacteria and algae within the pool. Should you choose to get a salt chlorinator installed in your pool, then you’ll need to purchase, as well as handle less amounts of chlorine. In many cases, you won’t have to purchase chlorine at all.

This makes the area around your pool safer since you no longer have to store chlorine and other pool chemicals in a place where children can’t access them. You’ll thus be saving money when it comes to purchasing chemicals. Salt chlorinators are also extremely effective at keeping the water in fibreglass pools extremely clean. The water in a saltwater pool is also less harsh than that in a chlorinated pool. This means that people who swim in your saltwater pool will experience less irritation in their eyes or skin. This is why a lot of people are turning to get saltwater pools installed in their homes.

What should you consider before getting a salt chlorinator for your pool

If you’re thinking of getting a salt chlorinator for your pool, then there are several factors you should consider first. These include:

Cost

The upfront cost associated with getting a salt chlorinator installed in your pool is more than if you were to use traditional pool chemicals. Some people are put off by the thought of needing to pay more to have a salt chlorinator installed. However, you’ll be saving money in the long run.

This is because you will no longer need to buy expensive pool chemicals on a regular basis. All you need to do, to sanitize your pool, is add salt to your pool water. Your salt chlorinator will take care of the rest. So even though getting a salt chlorinator installed is expensive, you’ll be saving money over the long run.

Fibreglass pools and saltwater

Saltwater is perfectly compatible with fibreglass pools. Unlike with vinyl liner or concrete pools, you don’t have to worry about the saltwater affecting your fibreglass pool in any negative way. Fibreglass pools tend to be smooth as well as non-porous, making them less likely to attract both bacteria as well as algae. This makes maintaining your pool water that much simpler.

Do think about what you’ll be placing around your pool, however. If you have concrete around your pool, then this could be affected by the saltwater splashing out. When people splash the water out of your pool, this will leave behind residues of salt around your pool. This could corrode any objects that have aluminium or metal fittings. This is why anytime you use your pool, you should use fresh water to wash the surrounding area down, to prevent salt deposits from forming.

Benefits over chlorinated water

Saltwater tends to feel softer on the skin, especially when compared to chlorine water. It’s well known that processed chlorine can be harsh on the skin. It can also make your hair more brittle, and may even end up changing its colour. There are also people who are allergic to chlorine in traditional pool water.

The salt you’ll find in saltwater pools is similar to the salt that is found within our bodies. This makes it easier for the body to handle. Even if someone accidentally ingests the saltwater in your pool, there’s nothing to worry about. Saltwater also doesn’t have the distinct smell that chlorinated water does.

Less maintenance

The biggest draw for people who get salt chlorinators installed in their fibreglass pool is that they’ll need to spend less time and money on maintaining their pool. Anytime you turn your pool pump on, your salt chlorinator will very be making chlorine. You also don’t need to add additional chlorine to the pool water, to keep it sanitized. It’s cheaper overall to use a salt chlorinator than to regularly purchase pool chemicals.

Conclusion

Salt chlorinators go perfectly with fibreglass pools. With a saltwater pool, you’ll be spending less money on keeping your pool sanitized. Although the initial setup costs might be high, you’ll be saving money over the long run. Saltwater pools are also easier on the eyes, the skin, and the hair, allowing people to enjoy spending time in the pool more.